Welcome, visitor! [ Register | Login

£1.00

integrated solar led street light suppliers

  • County: Northumberland
  • Country: Other ​countries
  • Listed: August 24, 2018 8:47 am
  • Expires: 58 days, 13 hours

Description

NOMO MSL 9000 all in one solar street light for municipal highway street lighting applications, high power solar street lights.
1.Brief Introduction.
Nomo smart LED solar street light has an elegant integrated aluminum alloy design and is one of the most convenient and versatile solar street lights on the market! This fixture does not require any wiring and is very easy to install and will automatically turn on and off during night and day . Built-in Intelligent controlling system to automatically compensate for different weather conditions of the world most sunlight coverage geography. True Dusk to Dawn feature, and able to light up to 3-4 in cloudy days illuminating time under IPM.
2. Features:
1. Patented Smart internet system, remote controlling, make the real intelligent lighting.
2. Solar panel auto-cleaning system(patent).
3. Super brightness LED chip , > 180 lumen/W.
4. Top level LiFePO4 battery , safe and long lifespan.
5. High strength entirety aluminum profile, gorgeous and durable.
6. Professional street light illumination distribution.
7. Efficiency >21.5% solar cell.
8. 90°X360°angle adjustable holder ,non-shadow.
9. No pollution, energy saving and environmental protection.
3.Product Specification:
Protection class: IP65
Light source :LED
LifePO4 Battery:921.6WH
Solar panel rate Power: 145(W)
Solar panel Voltage :18 (V)
Total luminous Flux: 9000LM
LED Qty;64pcs
Duration of sunshine :8 (h)
Lifespan: 500000 (h)
Monocrystalline solar panel:18V/145W Efficiency up to 21%
4. Technique specs
PV ModulePmax145w
Vmp31.2v
Voc37.2v
Cell Efficiency21%
Number of cell in series60
Dimension1920.*418mm
LED chipLED chipLG/Cree/Nichia
Viewing AngleViewing Angle ,70°*150°IESNA TAPE II
Color Temperature:3000K~3500K(warm white)/6000K-6500K(cool white)
Color rendering index>=70
Nominal luminous fluxTj=25℃:9000lm
Delivered Lumens Tj=66℃:8100lm
Lifespan50000hours
Lifepo4 batteryBattery capacity921.6WH
lifespan5-8 years
CertificationCB, SGS, MSDS
Operating temperatureCharging 0-45℃
Discharging -20-60℃
Mppt controllerWorking voltage/ current12.8v 10A
Work modeTiming mode
Light control(capable of detecting day and night , automatically turning on and off during night and day )
PIR sensor mode (opitional)
ProtectionIncorporate protection from reverse polarity(solar panel or battery ), over-charge , over-discharge , over load , short circuit and lightning
5. Dimension
6.Lighting distribution:

7.Work mode(can be customised)

8. Dialux Simulation
Height:8m , width:8m,pole distance; 30m , single sided arrangement ,simulated data

9.Packing/weight
· Qty:1pcs/carton
· GW:48kg
· NW:45Kg
· Product size:2015×560×180mm≈ 0.2m3
· Packing size 600*220*200mm≈ 0.03m3
10.Installation ;
I. Note:
● The work time depends on the weather condition, the season and the location
● It is waterproof, but limited to rain and moisture( cannot immerged into the water or stay in the water too long).
● Please be sure it is installed in a well-lit location where the solar panel can get maximum sunlight during the day.
● The fully charged street light can be stored up to six months. Please take timely inspection and charge the battery after a long time transportation and storage so that the battery can perform well.
● Facing south in the northern hemisphere and north in the southern hemisphere. Slope angle should be adjusted according to the local latitude. Solar panels must be installed in the sunny, no houses, trees shade place so that they can receive light all day ( Minimum requirements:9.00 am – 16.00 PM without sunscreen,)
● Keep cleaning the solar panel every few time so that the solar panel can generate power at maximum efficiency.
II. The Installation Instruction
1. Pole installation. Pole length range from 4-8m with diameter size 70-80mm, wall thickness over 3.0mm.
2. Check the spare parts as followings:
ITEM SPARE PARTS QTY REFERENCE
All in one solar street lights Street light1set
TAILSTOCK
1PCS
ANGLE ADJUSTING PARTS1SETS
SCREWInner Hexagon (Including flat washers, spring washers)5SETS
M8*15mm Hexagon8SETS
M14*35mm Inner Hexagon(Including flat washers , spring washers, nuts)2SETS
M6*12mm
Inner Hexagon (Including flat washers , spring washers, nuts)2SETS
Users Manual and label
1SET
3. Lamp Assembling
A:Angle adjustment plate installation, take out the hexagonal screw M8 * 30mm, fixing the angle adjusting parts to the lamp body; as shown below:
B: Connect the tailstock and the angle adjustment plate with M14 * 35 screws, then use M8 * 25mm screws to fix the angle ,the degrees of angle adjustment of each hole is 10 degrees , according to the local latitude , as shown below:
C: Install the tailstock of lamp on the lamp poles with M8 * 20mm hex screw fastening, adjusting the irradiation direction of the lamp .
After the above in

No Tags

  

Listing ID: 7975b7fb8067e374

Report problem

Processing your request, Please wait....

Featured Ads

  • MINI Cooper Hatch One
  • Chiropody and Medical Massage
  • Studio flat in Greenwich
  • Luxury 2 Bedroom flat in Putney